86-574-86882908
Product Categories
(Total 12 Products for Ansi C135 80 Ieee C135 80)
Square Head Machine Bolts for Poleline Hardware
Square Head Machine Bolt Yokelink Square head machine bolt used for fastening poleline hardware to crossarms, poles and other structures. Bolts have rolled threads and supplied with square or hex nuts per customer require. Bolts 8 inches or longer have cone-type points to ease starting.Manufactured from ANSI/IEEE Std...
Double Arming Bolts for Poleline Hardware
Double Arming Bolt Yokelink Double Arming Bolt used to secure two cable suspension clamps or other attachments on opposite sides of utility pole. Each Double Arming Bolt is supplied with four attached square or hex nuts. Bolt provide with cone point at each end to ease starting. Manufactured from ANSI/IEEE Std...
Nylon Thread Head Pole Top Pin
Yokelink Pole Top Pins with nylon alloy or cast lead insulator threads are mounted against the pole by 5/8-inch bolts. Manufactured from ANSI/IEEE Std C135.22. Hot Dip Galvanized to meet ASTM A153 Class 3.
316 SS Double Arming Bolts per IEEE C135.80
Double Arming Bolt Yokelink Double Arming Bolt used to secure two cable suspension clamps or other attachments on opposite sides of utility pole. Each Double Arming Bolt is supplied with four attached square or hex nuts. Bolt provide with cone point at each end to ease starting. Manufactured from ANSI/IEEE Std...
Forged Oval Eyenut 5/8 per ANSI/IEEE Std C135.80
Oval Eye NutOval eye nut are used for deadending, back guying and attaching pole head guys on the threaded end of crossarm bolts, helpful on the overhead power lines and pole line consturction.Yokelink Oval Eye Nut are made by Drop forging, manufactured according to ANSI/IEEE Std C135.80. The finish Hot dip galvanized...
IEEE Std C135.2 Single Strand-Eye Anchor Rods
Thimble Eye Rod Yokelink Thimble Eye, Twin Eye and Triple Eye Anchor Rods are dropped forged to single, double, or three strand eyes. One end of guy anchord is connected to a stay wire by a guy clamp, the other end is fixed to types of earth anchors buryied underthe ground, used for guying with expanding and...
IEEE Std C135.2 Thimble Eye Anchor Rods
Thimble Eye Rod Yokelink Thimble Eye, Twin Eye and Triple Eye Anchor Rods are dropped forged to single, double, or three strand eyes. One end of guy anchord is connected to a stay wire by a guy clamp, the other end is fixed to types of earth anchors buryied underthe ground, used for guying with expanding and...
IEEE Std C135.2 Doulbe Strand-Eye Anchor Rods
Twin Eye Anchor Rod Yokelink Thimble Eye, Twin Eye and Triple Eye Anchor Rods are dropped forged to single, double, or three strand eyes. One end of guy anchord is connected to a stay wire by a guy clamp, the other end is fixed to types of earth anchors buryied underthe ground, used for guying with expanding and...
IEEE C135.80 Deadend Fitting for Overhead Line Construction
Oval Eye Nut Oval eye nut are used for deadending, back guying and attaching pole head guys on the threaded end of crossarm bolts, helpful on the overhead power lines and pole line consturction. Yokelink Oval Eye Nut are made by Drop forging, manufactured according to ANSI/IEEE Std C135.80. The finish Hot dip...
IEEE C135.90 Insulator Pins for Overhead Line Struction
Insulator Crossarm Pins Yokelink Insulator Crossarm Pins forged from one piece steel. The base distributes load and provides a firm seat on the cross arm. Each pin is shipped with assembled hardware. All components are Hot dip galvanized to meet ASTM A153 specification. The
5/8 inch Thimble Eyenut per IEEE C135.80
Thimble Eye Nut Thimble eye nut are used for attaching to thru bolt or thimbleye bolts for straight away head guys. The thimble eye nut is assembled with the thread end of 5/8" or 3/4" eye bolts, which goes across the wooden pole for supporting the strain insulators to the dead end wire. Yokelink Thimble Eye Nut made...
Single Thimble Eyenut 3/4" J6511 IEEEC135.2
Thimble Eye nut Thimble eye nut are used for attaching to thru Bolt or thimbleye bolts for straight away head guys. The thimble eye nut is assembled with the thread end of 5/8" or 3/4" eye bolts, which goes across the wooden pole for supporting the strain insulators to the dead end wire. Yokelink Thimble Eye Nut made...
Categories
High Quality Products
Send Us a Message
We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
