Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Product Categories
(Total 12 Products for Tap Researting Tools 5 8)
Tap Reseater Tool tap cutter researting set
Tap Reseating Tool The tap reseating tool is a device used to repair a leaking tap. It is designed to reseat the valve seat inside the tap body, which is where the tap washer sits. Over time, the valve seat can become worn or damaged, causing the tap to leak. A tap reseating tool works by cutting away the damaged or...
Square Head Machine Bolts for Poleline Hardware
Square Head Machine Bolt Yokelink Square head machine bolt used for fastening poleline hardware to crossarms, poles and other structures. Bolts have rolled threads and supplied with square or hex nuts per customer require. Bolts 8 inches or longer have cone-type points to ease starting.Manufactured from ANSI/IEEE Std...
Double Arming Bolts for Poleline Hardware
Double Arming Bolt Yokelink Double Arming Bolt used to secure two cable suspension clamps or other attachments on opposite sides of utility pole. Each Double Arming Bolt is supplied with four attached square or hex nuts. Bolt provide with cone point at each end to ease starting. Manufactured from ANSI/IEEE Std...
Galvanized Hex & Heavy Nuts for Poleline Hardware
Hex Nut Yokelink Hex nuts are used to fasten attachments to machine bolts, carriage bolts, insulator pins and other bolts. Galvanized hex nuts are tapped oversize to compensate for the corrosion resistant coating on the bolts. Manufactured from ANSI/IEEE Std C135.80 and ANSIB18.2.2, Hot Dip Galvanized meet ASTM A153....
MF Type Curved Locknut for Poleline Hardware
Curved MF Locknut Yokelink MF type curved locknut used as a locking nut on the back of square or hex nut.Galvanized MF locknuts are tapped oversize to compensate for the corrosion resistant coating on the bolts. Hot Dip Galvanized meet ASTM A153. 1" MF Locknuts are available. When you need curved MF Locknuts refer to...
Spring Clip Washer with 11/16 Hole
Yokelink Spring Clip Washer used to keep units in tension when wood corssarm or wood pole shrinkage occurs. Hot Dip Galvanized meet ASTM A153.
Alley Arm Brace for pole line hardware
Alley Arm Brace The Alley Arm Brace is a type of poleline hardware used to provide additional support to a utility pole. It is typically installed on the side of a pole and extends outwards, providing a horizontal support arm that can be used to attach additional hardware such as transformers or crossarms. Yokelink...
Cutout & Arrester Bracket for Crossarm Mounting
Crossarm Mounted Cutout & Arrester Bracket Yokelink Cutout and Arrester Brackets are used for strength and mounting a variety of electrical equipment including arresters, cutouts, combination units and terminations. All components are Hot dip galvanized to meet ASTM A153 specification.
Thimble eye Anchor Rods 5/8"X6' for Expanding Anchor
Thimble Eye Rod Yokelink Thimble Eye, Twin Eye and Triple Eye Anchor Rods are dropped forged to single, double, or three strand eyes. One end of guy anchord is connected to a stay wire by a guy clamp, the other end is fixed to types of earth anchors buryied underthe ground, used for guying with expanding and...
8" Bust Expanding Anchor Black Painting
Bust Expanding Anchor The Bust Expanding Anchor is a type of hardware used in pole line construction. It is designed to provide a secure and stable anchor point for poles and other structures. The anchor consists of a steel rod with a tapered end and a conical-shaped expansion shell. When the anchor is inserted into a...
Cross Plate Anchor 20"X20" for 5/8" 3/4" Rods
Cross Plate Anchor The Cross Plate Anchor is a type of poleline hardware used for securing utility poles in the ground. It consists of a large metal plate with four or more pointed prongs that are driven into the ground using a hammer or other tool. The plate is then attached to the pole using bolts or other...
1 3/8 Cross Connector for Greenhouses
Aluminum Cross Connects - Purlin Clamps for Greenhouse Product Description Name: Greenhouse Cross Conntects Hoop Size:1 3/8", 1 5/8", 2"[1-7/8" O.D.], 2 1/2" [2-3/8" O.D.] Purlin Size: 1 3/8", 1 5/8" Material: Galvanized Steel or Aluminum Alloy Feature:&
Categories
High Quality Products
Send Us a Message
We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.