86-574-86882908
Product Categories
(Total 12 Products for Stainless Steel T Bolts C111 A21 11)
Stainless Steel T bolt for Mechanical Joint fitting
Yokelink Mechanical Joint T Head Bolt and Nut for Waterwork are accordance with ANSI/AWWA C111/A21.11. Material including High strength low alloy steel; and 304, 316 Stainless Steel. Diameters have 5/8”, 3/4”, 1” and 1-1/4”. The Length from 3” to 9”, Special thread lengths and non-standard lengths available on...
Stainless Steel T bolts according to ANSI/AWWA C111/A21.11
Yokelink Mechanical Joint T Head Bolt and Nut for Waterwork are accordance with ANSI/AWWA C111/A21.11. Material including High strength low alloy steel; and 304, 316 Stainless Steel. Diameters have 5/8”, 3/4”, 1” and 1-1/4”. The Length from 3” to 9”, Special thread lengths and non-standard lengths available on...
MF Type Curved Locknut for Poleline Hardware
Curved MF Locknut Yokelink MF type curved locknut used as a locking nut on the back of square or hex nut.Galvanized MF locknuts are tapped oversize to compensate for the corrosion resistant coating on the bolts. Hot Dip Galvanized meet ASTM A153. 1" MF Locknuts are available. When you need curved MF Locknuts refer to...
Spring Clip Washer with 11/16 Hole
Yokelink Spring Clip Washer used to keep units in tension when wood corssarm or wood pole shrinkage occurs. Hot Dip Galvanized meet ASTM A153.
Galvanized Transformer Mounting Brackets
Transformer Brackets Yokelink Transformer Mounting Brackets are used in cluster mount for one, two or three transformers for poles ranging from 6 1/2 inch to 11 inch. All components are Hot dip galvanized to meet ASTM A153 specification. When you need Transformer Brackets, refer to above our catalog. We offer them in...
Cutout & Arrester Bracket for Crossarm Mounting
Crossarm Mounted Cutout & Arrester Bracket Yokelink Cutout and Arrester Brackets are used for strength and mounting a variety of electrical equipment including arresters, cutouts, combination units and terminations. All components are Hot dip galvanized to meet ASTM A153 specification.
Galvanized Utility Pole Band Clamp
Pole Band The Pole Band is a metal band that is used to reinforce a utility pole. It is typically made of steel and is placed around the pole at a specific height to provide additional support and stability. Pole bands are commonly used in areas where the soil is unstable or where there is a risk of the pole leaning...
Cast Ductile Iron Guy Attachment Hook for Pole
Ductile Cast Iron Guy Hook Yokelink Ductile Iron Guy Hook used in down or span guy applications. Spurs resist down slotting. The overturning action is resisted by the wide lower curved heel pad. It is typically made of Cast ductile Iron and has a curved shape that allows it to be easily attached to the pole. The guy...
11mm Linch Pin 3 point Hitch lynch pins
Yokelink Linch Pin designed with Slide the pin through a hole then snap the ring down to lock these pins in place. Also known as click pins, Lynch Pin. Use them to secure clevis pins and shafts to keep components in place. Attach pins that have a chain to your work to keep them from getting lost. Available with Chain...
ANSI/AWWA C111/A21.11 Mechanical Joint T-Bolt and nut
Yokelink Mechanical Joint T Head Bolt and Nut for Waterwork are accordance with ANSI/AWWA C111/A21.11. Material including High strength low alloy steel; and 304, 316 Stainless Steel. Diameters have 5/8”, 3/4”, 1” and 1-1/4”. The Length from 3” to 9”, Special thread lengths and non-standard lengths available on...
ANSI/AWWA C111/A21.11 Mechanical Joint T-Bolt
Waterwork T Head Bolts & Nuts The Mechanical Joint T Head Bolt Manufactured from corrosion-resistant, high-strength, low-alloy steel in accordance with ANSI/AWWA C111/A21.11, that has a baked-on ceramic-filled fluoro carbon resin, which handles the needs of highly corrosive conditions. Heads are stamped with the...
5/8"-11 Oval Eye Nut for Power Line Hardware
Oval Eye Nut Oval eye nut are used for deadending, back guying and attaching pole head guys on the threaded end of crossarm bolts, helpful on the overhead power lines and pole line consturction. Yokelink Oval Eye Nut are made by Drop forging, manufactured according to ANSI/IEEE Std C135.80. The finish Hot dip...
Categories
High Quality Products
Send Us a Message
We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
